Sgneep logo

Why Sgneep-Script:

Sgneep-Script consists of a simple program whose purpose is the interaction with other programs, much more complex, in which the most significant operations take place.

With Sgneep-Box script the programmer is not interested in the system resources that the finished program will have to consume, delegating the whole Sgneep-Box OS.

For resources we mean, for example, sensor control, video playback, initialization and closing of the application.

In this way we avoid many problems typical of traditional programming, which is subject to insidious errors, not easily identifiable and dangerous, and also forces the programmer to deal with issues not strictly related to the objective of the software to be created.

The use of Sgneep-Script allows to concentrate instead directly on the solution of the problem

Requirements:

boot ready

First we need to have 1 raspberry pi3 model B, a 32GB usb stick, and a micro-SD card with RaspBian Installed.

The micro-SD will be used to set the raspberry pi3 in UsbMode.

This is official page on how to set the usbMode click here

Download Sgneep-Box

Decompress the .zip file you downloaded, Sgneep Box was compressed with 7Zip(7Zip official page)


Write Sgneep-Box in USB STICK

Download and install win32 disk imager (official site)

win32_app

Run Win32DiskImager in windows OS

1- Ensure the Device drop down box has the drive your USB MEMORY STICK is insered into.

2- Press the folder button and select sgneepbox_v1.2018.img

3- Press Write Button

Wait for Win32 Disk Imager has finished, remove the usb stick and insert it into your raspberry pi3.

If you've run the guide correctly you're ready to use Sgneep-Box by turning on your raspberry pi3.


Open your first script

After starting up, you will hear the welcome message and imediately the Sgneep-Box Terminal will open.

You can control Sgneep-Box only from this terminal.

For an overview of the commands, check this page.

Powered by Sgneep.com